TAC Digital Torque and Angle Wrench, 30 - 150 in-lb
SKU
810712
Product Details
- Audible/tactile pulse when preset torque is achieved
- Keep up with the shortest of takt times
- Fully compatible with the Global 400, Global 400mp, and the TCV e2 torque controllers
- Works with the Patented Holding Tool when used with the Global 400 or Global 400mp
- Access to over 200 interchangeable heads that all fit on the end of the Pin and Spring Dovetail
- Heads "Lock On" to the Dovetail when the head is centered on the wrench
- Powered by one AAA NiMH rechargeable battery; Using any battery other than a AAA NiMH immediately voids the warranty
- Ships with two NiMH rechargeable batteries, charger sold separately
- Accuracy of +/- 4% of the indicated value between 20% and 100% of the rated torque capacity
- #Equipped with two LEDs: green/red for OK/NOK and blue that pulses when tool becomes active and ready for use
- Pulsing blue LED timing can be adjusted in the controller to help operators identify the active tool if there are multiple TAC wrenches in a work cell
- Requires a special tool to set torque value, this prevents inadvertent changes to the torque output
- Comes with ISO 17025 Calibration Certificate if we set the torque value at the factory
- Torque modes of operation include Click and Peak
- Click reads the torque value at which the wrench clicked
- Peak reads the highest applied torque value
- Operates in Torque and Angle Monitoring (TAM)
- Modes of operation are set in the controller and can be changed on a parameter-by-parameter basis
- Torque value must be changed by adjusting spring tension
- PLEASE NOTE: See below for manuals & details drawings; click the drop down menu, click on specific product PDF, click the download button
Documents
Technical Details
Download PDF